![]() I recommend using the free FCC site, to find signals in your area. I’ve found that you get the most channels when you scan and select “Air.” If you are not happy with those results you can try to scan by “Antenna” too to see that best fits your needs. (The HD antenna catches the signal, and your converter box would change them into analog so your TV can read them.) If you are using a TV that was manufactured in 2008 or earlier you might need a converter box, and HD antenna for your TV. Like paulmohr stated, digital signals which are now broadcast are different than analog signals that were used prior to 2009. If you are still having problems after trying these solutions, please your TV's manufacturer for support.Antennas can be super tricky, but they are also an easy way to get the most out of your TV if you don’t have a cable subscription. Unplug your TV from the wall for 30 seconds and then plug it back in. Try another inputĬhange the input on your TV to see if that fixes the issue. ![]() If you are using a cable or satellite box, try resetting it by unplugging it from the wall for 30 seconds and then plugging it back in. Make sure that all of the cables are properly plugged in and that there is no damage to them. Here are a few tips on how to fix the "No Signal" problem: Check the cables This could be due to technical difficulties with the network or because of bad weather. There are a few different things that can cause your TV to say "No Signal." Here are some of the most common ones: The input signal is not turned onĪs mentioned before, make sure that the input signal for your TV is turned on. If you are still having problems after trying these solutions, please contact us for assistance. If there is no signal coming from the broadcaster, there is not much that you can do except wait until it comes back on. There is no signal coming from the broadcaster If you are using an antenna, make sure it is properly plugged into the back of your TV. If you are using a cable or satellite box, make sure it is turned on. This can usually be found by pressing the "Input" or "Source" button on your remote control. Make sure that the input signal for your TV is turned on. ![]() Here are some of the most common causes and their corresponding solutions: The input signal is not turned on If your TV says "No Signal," there are a few things that you can do to try and fix the issue. Finally, if your TV is not properly tuned to the channel you are trying to watch, you may see the "No Signal" message. If there are too many devices using the same frequency range as your TV, it may cause a disruption in the signal. Another common issue is interference from other devices, such as wireless routers. If the connection is loose or if there is too much noise on the line, your TV may not be able to receive a signal. ![]() There are a few things that can cause your TV to say "No Signal." One of the most common causes is a bad cable or satellite connection. We will also provide some tips on how to prevent this from happening in the future. In this blog post, we will discuss some of the most common causes for this problem and how to resolve them. If you are watching your favorite show and all of the sudden the screen goes blank with the words "No Signal," don't panic! There are a few things that you can do to fix the issue.
0 Comments
Leave a Reply. |